According to the configuration and working environment, the types of tracks can also be divided into many types, such as large and small. small trackhoe can cross kinds of obstacles, hillsides, ridges, etc., which are not affected by road conditions. Moreover, Quality small trackhoe is small and flexible, suitable for all kinds of workplaces, and works freely in a narrow space. As a very important part of the trackhoe, the state of the track also affects the normal use of the equipment. Therefore, the professional small trackhoe company will introduce the problems needing attention during the operation of the small trackhoe:

1、 Always check the bolts and nuts of the small trackhoe, because if the excavator continues to operate when the bolts of the track shoe are loose, there will be a gap between the track shoe and the bolts, which will lead to cracks in the track shoe. Therefore, once it is found to be loose, tighten it immediately.

2. If the high quality small trackhoe walks repeatedly on the inclined ground for a long time and turns suddenly, the side of the rail link will contact the side of the drive wheel and the guide wheel, thus increasing the degree of wear. Therefore, walking or sudden turning in inclined areas should be avoided as far as possible.

3. If some carrier sprockets and rollers cannot operate, they must be repaired in time. Otherwise, it is likely to lead to the deviation of the roller and the wear of the rail link.

The design and application of zero rear rotation radius of small trackhoe makes it unnecessary for the small trackhoe operator to consider whether there are obstacles on the construction site to hinder the rotation of the small trackhoe when the small trackhoe operates in the environment with limited working space, so that the operator can pay more attention to the operation of the bucket, This also prevents damage to buildings around the construction site and the small trackhoe itself.