What are the reasons for the temperature increase of customized small excavators Manufacturers china

1. Check the heat dissipation of heat pipe of customized small excavator Manufacturers china.Customized small excavators work in harsh environments all year round. Therefore, a lot of dust and small debris will always block the heat pipe heat dissipation of four column hydraulic press and the heat pipe heat dissipation of water storage tank, especially when the heat pipe heat dissipation and residual oil leakage of four column hydraulic press are small. Just keep the heat pipe heat dissipation behind the automobile oil tank, so everyone should pay attention to the leakage of heat pipe heat dissipation of four column hydraulic press.

2. Check the sealing ring of engine cylinder head of customized small excavator Manufacturers china. I don't know if you noticed what kind of water is in the storage tank during circulation. It could be a bubble. If such a situation exists, the cylinder head of the engine has deficiencies.

3. Check the customized small excavator pump to operate the machinery and equipment, and then be good at extruding the tap water pipe. If it feels strong during extrusion, it means that there is no problem with the pump. If it is easy to squeeze, the pump circulation is not good!

4. Check whether the water tank cover of the customized small excavator is damaged, which will also cause the temperature to rise. Due to the cracking of the water tank cover, it is easy to cause water to enter within the service life of the circulating water system. So the temperature will be higher!

5. Check whether the temperature controller of customized small excavator Manufacturers china has been opened or stuck. Generally deleted in summer!

6. Check whether the fan is at high speed and cannot follow the vehicle engine pulley. This is also the reason why the temperature is easy to rise! Check the diesel pump.

7. Check the flow of diesel pump. Of course, it is now a machine of automatic control system. There may also be very large or small lubricating oil, such as diesel pump, or the angle of gasoline pump is wrong. The temperature is also very high. However, such cases are very rare.

8. Checking the dirt in the waterway reduces the water flow, which is also a difficulty.

9. Check the concrete antifreeze. If you add concrete antifreeze to your machine and equipment, it will evaporate. This means that you have not added ethylene glycol concrete antifreeze. Since the melting point of the real ethylene glycol concrete antifreeze is 105-110 degrees, which is higher than the air density, it is not easy to evaporate. Therefore, we should pay attention to freezing!