The small loader must use the correct method when operating it. Let's talk about the correct method below.

    1. Operators must hold certificates to work, and non-professional drivers are strictly prohibited to work. Do not leave the post without authorization during work, and do not operate machinery that does not conform to the operation certificate. It is strictly forbidden to hand over the mechanical equipment to personnel who do not have the operating license of this model. Operation after drinking is strictly prohibited.

    2. The operator must strictly implement the inspection system before work, pay attention to observation during work, and inspection and maintenance system after work in accordance with the provisions of the machine manual.

    3. Before each operation, check whether the lubricating oil, fuel and water are sufficient, whether various instruments are normal, whether the transmission system and working devices are intact, and whether there is no leakage in the hydraulic system and various pipelines. After confirming that they are normal, start it.

    4. Before the operation, the operation driver and the construction team leader must learn and understand the content provided by the technical person in charge. If they do not understand or are unclear, they should promptly check. Among them, the operation driver and the construction team leader must clearly record the types and locations of the obstacles on the ground, on the ground and in the air at the work site. Construction at this location must follow the command of the construction team leader. Operation without command is strictly prohibited.

    5. The cab or operating room should be kept tidy, and it is strictly prohibited to store flammable and explosive materials. Wearing slippers, smoking and working after drinking are strictly prohibited. It is strictly prohibited to operate the machine with failure or overload.

    6. For water-cooled machinery, when the temperature is lower than 0℃, water should be discharged in time after work, or other anti-freezing measures should be taken to prevent freezing and cracking of the body.

    7. During construction, the underground obstacles on the site must be marked first, and a special person must be assigned to direct the construction of the machinery to ensure the stability of the underground obstacles and mechanical equipment.

    8. When mechanical equipment is parked at the construction site, choose a stable parking place, lock the door of the cab (operating room), and pull on the parking brake. When parking on a ramp, use triangle wood or stones to hold the wheel against the wheel. Special personnel should be supervised at night.