The correct operation method of the loader can be summarized as: one is light, two is stable, three is separated, four is diligent, five is coordinated, and six is strictly forbidden.

One light: When the loader is working, the heel is pressed on the floor of the cab, the foot plate and the accelerator pedal are kept parallel, and the accelerator pedal is lightly stepped on.

Second stability: when the loader is working, the accelerator should always be stable. Under normal operating conditions, the throttle opening should be around 70%.

Three separations: When the loader is working, the footboard should be separated from the brake pedal and placed flat on the floor of the cab without stepping on the brake pedal. Loaders often work on uneven construction sites. If the foot is kept on the brake pedal, the body will move up and down, causing the driver to accidentally press the brake pedal. Under normal circumstances, the loader uses the throttle deceleration method to control the engine condition and shift gears. This not only avoids overheating of the brake system caused by frequent braking, but also brings convenience to the rapid acceleration of the loader.

Four Qin: When the loader is working, especially when the electric shovel is working, the bucket should be filled with materials by cyclically pulling the lifting and bucket control levers when the accelerator is stable. The cyclic pull of the lift lever and bucket lever is called "dumb". This process is very important and has a great impact on fuel consumption.

Five cooperation: Coordination is the organic cooperation between the lifting and bucket control levers. The typical digging process for a loader begins with laying the bucket flat on the ground and pushing it steadily toward the stockpile. When the bucket encounters resistance when it is parallel to the shovel pile, the principle of first lifting the arm and then closing the bucket should be followed. This can effectively avoid the resistance at the bottom of the bucket, so that a large breakthrough force can be fully exerted.

Conclusion:
Learning how to drive a mini loader is an invaluable skill that can enhance your productivity in various industries. By mastering the basics, practicing the operating techniques, and exploring customized options, you can become a proficient mini loader operator. Visit hixen.cn to find a reliable source for customized mini loaders at affordable prices. Start your journey towards becoming a skilled mini loader operator today!