Operation specifications that should be observed during lifting operation of good price and quality 1 ton excavator Manufacturers china. Please observe the following operating regulations:

1. The good price and quality 1 ton excavator Manufacturers china shall be equipped with a bucket hook that meets the lifting requirements. It is forbidden to directly put the sling on the bucket teeth; Strictly check whether the hook is intact before operation.

Many people think that good price and quality 1 ton excavator Manufacturers china is a digging machine used to load a car, dig a ditch or level the ground. In fact, excavators can also do many kinds of work, such as crushing, demolition, hoisting, etc., which are often done by excavators. For novices, good price and quality 1 ton excavator Manufacturers china hoisting is a very dangerous operation. Today, let's talk about what we need to pay attention to in hoisting operation

When lifting the good price and quality 1 ton excavator Manufacturers china, the bucket is generally used to lift the object. According to the different lifting objects, the hook behind the bucket can be used or directly hung on the bucket teeth. These two hooking places should be determined according to the actual situation, otherwise it will cause potential safety hazards.

Generally, there is a hook at the back of the bucket. It is safe to lift here. Especially when the object needs to be lifted to a certain height, if the rope is hung on the bucket teeth, it is easy to slip during lifting. The use of hook can ensure that the rope will not slip, which is the recommended safe hoisting method.

Is it not recommended to use bucket teeth for hoisting? Of course not. When the lifted object is very close to good price and quality 1 ton excavator Manufacturers china, it is very suitable to directly lift the object with bucket teeth. In addition, if the lifting distance is not very high, it is also very convenient to use the bucket tooth hook.

2. The footwall is stable to prevent rollover

The precursor of safe operation is to hoist with good price and quality 1 ton excavator Manufacturers china and stand firmly on the vehicle body.

To prevent the excavator from overturning, good price and quality 1 ton excavator Manufacturers china must stand on a horizontal parking surface during hoisting; If the object is hoisted on the slope, a horizontal parking surface can be excavated first.

In addition to the parking surface, the orientation of the excavator chassis is also very important. The smaller the angle between the hoisting direction and the chassis track direction, the safer the good price and quality 1 ton excavator Manufacturers china is, and the larger the angle is, the easier it is to cause the excavator to overturn.

When lifting the good price and quality 1 ton excavator Manufacturers china, it is actually a lever state. Always pay attention to the distance from the center of gravity of the lifted object to the center of gravity of the good price and quality 1 ton excavator Manufacturers china. The closer the lifting object is to the center of gravity of the excavator, the safer the excavator is and the greater the lifting capacity can be brought into play; The farther the lifting object is from the center of gravity of the good price and quality 1 ton excavator Manufacturers china, the greater the risk of overturning of the excavator and the more limited the lifting capacity of the excavator.

3. Reasonable operation safety
During hoisting, pay attention to the reasonable operation sequence and give priority to lifting the boom. When the boom is in place, you can open the jib and bucket, which will also play a certain lifting effect.

Pay attention to lifting objects. Don't lift them too high when they don't need to be lifted too high. Once the good price and quality 1 ton excavator Manufacturers china is in danger of overturning, take time to lower the boom and put the lifted objects on the ground quickly.

Sometimes when good price and quality 1 ton excavator Manufacturers china lifts an object, it not only needs to lift it vertically, but also put the object at a certain angle. At this time, it is necessary to cooperate with the command gestures of the on-site construction personnel. When rotating and adjusting the angle, the crawler and rotation need to act at the same time.