Apart from the maintenance of the machine, the daily operation cost of the customized mini trench excavator Manufacturers china accounts for the majority. It is burning oil. Does it cost too much to refuel the machine every time? Because of the inevitable need to refuel, it is necessary to work hard from fuel saving to provide you with fuel saving skills for customized mini trench excavator Manufacturers china operation.

1. During loading, the customized mini trench excavator Manufacturers china shall be located at a higher position, and the customized mini trench excavator Manufacturers china shall be parked at the same height as the working table

The reason is very simple. A stone, do you lift your knees as hard as your head? How much "energy" will it save? Assuming the same height as in the early years, the power can be trekked by 40% Cool!

2. When the bucket cylinder and connecting rod, ejector cylinder and ejector rod are at 90 °, each cylinder pushes the customized mini trench excavator Manufacturers china with the maximum force

3. When the customized mini trench excavator Manufacturers china the natural ground, the bucket or loosening equipment shall keep the ground angle at about 30 °, and then retract the bucket rod When the bucket lever is close to the vertical, the bucket lever has the maximum force and can bear more load

These two keys are like bending your arms to carry things. You should still keep your arms straight and of course bend them

4. At the beginning of the excavation of the customized mini trench excavator Manufacturers china, do not extend the bucket rod to the maximum function planning. The best function planning is about 80%

5. Bucket shaft excavation planning: the angle from the furthest 45 ° to the inner side of the bucket shaft is 30 °

The excavation depth is slightly different, but the larger stick and bucket should be operated within this plan, not at the end of the hydraulic cylinder stroke

6. During the continuous excavation of the customized mini trench excavator Manufacturers china, place the chassis forward so that you can walk immediately after excavation If you want to walk, please change again. You will burn a lot of oil at the beginning and end

7. When the customized mini trench excavator Manufacturers china digs the ditch, first dig the two ends of the ditch, and then dig the central part In this way, excavation in the center can save a lot of homework and energy

8. Put the customized mini trench excavator engine in the economic gear Select auto idle to allow the engine to spin in the discovery space

9. Minimize the rotation radius

10. The smaller the excavation depth of the customized mini trench excavator Manufacturers china, the better the excavation economy

The excavation is divided into three layers: upper, middle and lower. Assuming that the excavation is carried out from low to high, the first is to increase the action planning, and then reduce the operation power due to the increase of the power planning of the customized mini trench excavator Manufacturers china, which will cost a lot of oil.