With the lowering of the threshold of excavators, especially the popularity of good price and quality small excavators in the past two years,good price and quality small excavators china are not uncommon in rural areas. Although it is still rare to use excavators to do agricultural work in rural areas, the operation of good price and quality small excavators is not necessarily correct, because many people have not studied professionally, but only rely on some experience to operate, It is possible to use excavators in the wrong way, so how to use small excavators china for agricultural work?

Method 1: when transporting good price and quality small excavators china, it should be noted that during transportation, never sit on the good price and quality excavator china. When unloading, try not to drive off the vehicle, but use the natural height of forklift or earth slope to unload. At the same time, try to reduce the height of the bucket.
Method 2: when working with good price and quality small excavators on the ramp, do not arrange multiple excavators to carry out construction on the same ramp, which may be more common in cultivated land in the south. Moreover, even when working on flat ground, you should remove the obstacles on the ground in advance and do not leave potential safety hazards.
Method 3: during the operation of small agricultural excavators, do not use good price and quality small excavators to transport goods and agricultural tools, and do not adjust the engine, hydraulic system and circuit system at will.
Method 4: do not use the large and small arms of the good price and quality small excavator china to carry out the force of horizontal drag, because the design of the large and small arms of the excavator is designed for vertical force up and down, and the horizontal force will cause damage to the excavator.
Method 5: accurately control the big and small arms and buckets. If the technology cannot be reached, the driver shall not use the support force of the big and small arms and buckets to lift the excavator, nor rotate when the bucket is not retracted, because the good price and quality mini excavator china will be directly damaged if encountering obstacles.
Method 6: when working with a small excavator china, do not use a small excavator to crush unknown objects at will. If you encounter hard objects, you need to clean them and continue the construction.
Method 7: when driving a good price and quality small excavator china, you should not go to dangerous areas, such as ditches, slopes, deep pits, etc., because the excavator itself is too heavy, it is easy to collapse the soil layer or fall into deep pits.

Method 8: when it rains, when driving a good price and quality small excavator on a muddy road, you should keep moving at a constant speed to prevent muddy water from entering the excavator. If the road is difficult, you should use wooden boards and other things that can pave the road.

Method 9: if the good price and quality small excavator china has abnormal phenomena, such as abnormal noise, peculiar smell, etc., stop working immediately and check the fault of the small excavator.

Method 10: now many good price and quality small excavators china are equipped with electronic instrument panel, which can check the temperature of hydraulic oil and engine oil at any time to prevent flameout caused by too high temperature.

Method 11: when driving a good price and quality small excavator china, you should always pay attention to wires, cables, culverts and other public facilities and dangerous areas, try to keep a safe distance, do not damage public facilities, and ensure your own safety.

Method 12: in order not to affect the stability of the good price and quality small excavator during operation, the large and small arms of the good price and quality small excavator china should be consistent with the crawler. Even if there is a deviation, do not deviate too much angle.